Geometrics G-822A, Руководство по эксплуатации

Страница: 47 / 62

Geometrics, Inc. G-822/G-823 Magnetometer Manual
41
Label
This allows a 10-character label to be associated with the analog channel. These labels
make it easy to identify each trace by looking at the label. The labels are written at the top
of the screen and color coded to match the associated trace. To erase the default label of
"channel n" use the backspace key and then enter a new one.
Set trace color
Use the "+" and '-' keys to cycle through all the possible trace colors using the label name
entered above as a guide.
After the above data have been entered, the display channel will be plotting. At the top of
the screen all of the activated display channels are documented in the same color as their
associated trace color as in the following example:
Pitch
A13

1000C
The display channel in this case was labeled "Pitch". Underneath it is a shorthand display
of all the setup parameters:
"A" : signifies this is an analog channel.
"1" : the counter number [0-2]
"3" : the counter channel number [0-5]
"

" : Bipolar mode, would have been set to "-" for unipolar
"1000" : Full scale value. If "0000" is displayed it mean "10000" full scale.
"C" : Clipped display, would be a "W" for wrap mode.