4
Menu
☞
The SET UP menu can also be accessed by using the keys on the
remote control. The functions on the remote control are the
same and the lock key
on the remote control corresponds to
the Enter key
on the laser keypad.
1.
Set the grade of the laser to 0.000% and turn off the laser.
2.
Turn the laser on again. The start screen appears and the state
of the battery is displayed.
3.
Press the up arrow key
and Enter key
simultaneously until the SET UP
screen appears.
SET UP
>INFO
SETTINGS
CALIBRATION
SERVICE
EXIT
007179_001
☞
The active menu step is highlighted and >
is displayed in front of the line.
Access to the
SET UP Menu
Menu
63
