2
| SPLICING PREP | GEOKON
1.1
REMOVABLE END PREPARATION
1.
Remove the three #10-32 x 3/8” long hex socket head cap screws from the
circumference of the tube.
2.
Detach the removable end cap from the tube.
3.
Unscrew and remove the cable fitting nut from the removable end cap.
1.1.1 ARMORED CABLE
Note:
For preparing blue unarmored cable, please refer to Section 1.1.2.
1.
Slide the black 02-500PEI armored cable through outer end of the Kellems
grip and and through the fitting nut.
Note:
Compress the Kellems grip lengthwise to aid in sliding the cable.
Cap Screw
Cap Screw
Cap Screw
Removable End Cap
Connector Adapter
Fitting Nut
Grommet
Fitting Nut
Connector Adapter
Removable End Cap
Kellems grip
Armored Cable
Fitting Nut
