GeoCue True View 410 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 40

GeoCue True View 410 Скачать руководство пользователя страница 4

True View 410 Hardware User Guide

4

True View 410 Hardware User Guide

8/3/2020

ABOUT GEOCUE GROUP, INC.

GeoCue Group was founded in 2003 by a group of engineers with extensive experience in developing
hardware and software solutions for primary remote-sensed data acquisition. Our initial products were
aimed at reducing schedule and cost risk in geospatial production workflows by providing
organizational, productivity and data management tools for base geospatial data production. These
tools have been realized as the GeoCue product family. Today GeoCue workflow management tools are
used by a majority of North American geospatial production shops. In 2005, GeoCue began selling and
supporting Terrasolid tools for kinematic LIDAR data production. This was followed in 2009 by our
acquisition of QCoherent Software LLC, the creator of the point cloud exploitation toolset, LP360.
Today GeoCue is the largest supplier of kinematic LIDAR processing tools in North America and LP360

is the world’s most widely used tool for exploiting point cloud data. In 2014, GeoCue Group started a

division focused on using small Unmanned Aerial Systems for high accuracy mapping. Leveraging our
expertise in production, risk reduction, and point cloud processing tools, we are continuing to bring new
services and products to market to provide surveyors and other geomatics professionals exciting tools
for geospatial data extraction using low cost drones including Loki, our plug-and-play PPK direct
positioning system, and now our new True View LIDAR/Imagery fusion sensors. To learn more, visit

«
...
2
3
4
5
6
...
»

Содержание True View 410









































Отзывы:

Нет отзывов