genz GC48V-040LFP-2RU, Руководство по эксплуатации продукта

Страница: 5 / 25

LFP Battery Module – Product Manual
All rights reserved genZ 2020
Issued for Use Revision Page
4/03/2020 2.1 5 of 25
4 Specifications
NOTE: All Specifications shown are for an ambient temperature of 25C (77F) and
charge / discharge rates of 0.5C unless otherwise stated.
Model
GC48V-040LFP-2RU
Series III
GC48V-060LFP-2RU
Series III
Nominal Voltage Direct Current (DC) 51.2V (48V)
Nominal Capacity 38.4Ah/2kWh 57.6Ah/3kWh
Nominal Current 19.2 Amps 28.8 Amps
Maximum Current 60 Amps (limited by circuit breaker)
Maximum DC Power 1966 Watts 2949 Watts
Minimum Charge Current 0.38 Amps 0.58 Amps
Maximum Charge Current 19.2 Amps 28.8 Amps
Charge/Discharge cycles to specified
Depth of Discharge (DoD)
Capacity retention >80% 10,000 @ 80% DoD
5000 @ 90% DoD
(2500@100% DoD and 1C)
Operating Temperature Limits
Charge 0° to 55°C
Discharge -20° to 60°C
Operating Humidity (non-condensing) 85%
IP Rating IP50
Battery Case Dimensions (mm) 450D x 420W x 88H 570D x 420W x 88H
Battery Tray Dimensions (mm) 450D x 483W 570D x 483W
Tray Slide Range (mm) 480 to 760 590 to 880
Terminal Connection Genuine Anderson SB50 BLUE
Weight Module 23.7kg 35kg
Weight Tray Approximately 4.2kg
1
BMS Over Volt cut off Approximately 58.4V
BMS Under Volt cut off 40V
BMS Short Circuit cut off 200 ± 30A (20mS Trip)
BMS Over Temp cut off 65°C
Charge time Approx. 2 hours at 19.2 A 2 hours at 28.8 A
Self-Discharge 14% per annum
Round Trip charge/discharge efficiency >= 96%
Circuit Breaker Compliance Double Pole, non-polarised, 60A IEC 60947-2
UN Type Number (Module chemistry) UN 3480
Lithium Composition
As Lithium Ferro Phosphate, LiFePO
4
or LFP
Decisive Voltage Classification (DVC)
Class A
Casing /Coating Steel / Satin white industrial coating
Certifications See genz.com.au for details
1
The over voltage cut-out may vary from that stated. This is due to the fact that the BMS
protects the internal cell string voltages ahead of overall pack voltage.