background image

 

 

 

T o   B e   A w a r e   O f   / /  

 
 
 

 

 

The base of your GT Sky Loft must always be inflated to the recommended 
pressure as this is what gives your Sky Loft the integrity and strength that it 
needs.  We  do  not  recommend  under  inflating  your  base  as  this  will  cause 
damage to your Sky Loft tent and possible personal injury. 

 

 

 

Never use the deflation points on your pumps to deflate your GT products as 
this may cause damage to the inner tubes. 

 

 

 

Make  sure  the  ladder  is  pushed  firmly  into  the  ground  as  this  will  also  help 
support the base of your GT Sky Loft. 

 

 

 

For extra sleeping comfort, we recommend using our GT mattress. 

 

 

 

When deflating, allow a couple of minutes for the air to naturally escape before 
attempting to fold the tent together.

 

 

 

We also provide an annexe attachment for extra space 

 This zips around the 

base of the nosecone and surrounds the ladder. However, this will not fit inside 
the zipped cover so this annexe will need to be removed, folded and packed 
separately.

 

 
 
 
 
 
 

If you have any further questions, please contact one of our team members and we will be 

glad to help you. 

 
 

J a c e   W a r d e n :

    0 4 3 1   4 0 0   8 0 3  

E m a i l :

  t e a m @ g e n t l e t e n t a u s t r a l i a . c o m . a u  

 

Содержание GT Sky Loft






Отзывы: