1
Read all Instruction, SAVE THESE INSTRUCTION
Safety, Set-Up, and Operating Instructions
Gas Welding, Cutting, Brazing & Heating
There are many hazards to be considered when using oxy-fuel
welding, cutting, brazing and heating equipment. Proper safety
precautions must be taken when using such equipment.
Read, understand, and implement all safety precautions prior
to performing any welding, cutting, heating or brazing
operation!
This handbook is offered as a practical guide to the safe
operation of this equipment.
This Outfit comes complete with Torch Handle
Reverse Flow Check Valves.
(Note: See page 14 for check valve maintenance.)
Reverse flow check valves should
always be used between the
torch
handle
and the regulator during use of the welding
outfit. Check valves are used to prevent mixed
gases from flowing back into the hoses or regulators.
Oxygen or fuel separately are not explosive.
However, when the two are mixed together in a hose
or regulator they can ignite and cause an explosion,
resulting in injury or damage.
16
READ ALL
INSTRUCTIONS,
SAVE THESE
INSTRUCTIONS
9-WI9CV-1198
