Page
3
of
7
INTRODUCTION
The Universal Power supply (300V) has the following Technical specifications and Characteristic
features:
Technical Specifications
•
Type of Output: Constant-Voltage, Current or Power
•
Increment: 1V, 1mA, 1W
•
Timer Range: 1min-99hr:59min
•
Display: LCD display with backlight
•
Output jacks: Four sets of output jacks
Characteristic features
•
Molding shell, touch keys, dual core microprocessor intelligent control;
•
Indicate the preset value and the actual output value at the same time;
•
It can store 10 electrophoresis methods;
•
With automatic memory function;
•
With standard, timing operation function;
•
With constant voltage, constant current, constant power, incorrect operation, fault intelligent
prompt functions;
•
Automatic detection of no-load, over-load, short circuit, rapid resistance change, ground leak
and system overheating.
SETUP AND OPERATION
1.
Turn on the power switch, enter into Setting State.
EDIT [ 0 ]
U = 100V
0v
I = 500mA
0mA
P = 300W
0w
2.
The cursor will flash at “U=□□□V”. Set the value of constant voltage by pressing “
▲
”
or “
▼
”
button.
3.
The cursor will flash at “I = □□□mA” when press “ENT” button.
Set the value of constant current
by pressing “
▲
”
or “
▼
”
button
4.
The cursor will flash at “P = □□□W” when press “ENT” button. Set the value of constant power
by pressing “
▲
”
or “
▼
”
button. The range of power can be set from 1 to 300W. The cursor will
return and flash at “U =
□□□
V
”
when you press “ENT
”
button. Set the value of constant voltage
again by pressing “
▲
”
or “
▼
”
button.
