GENMAX GM3500Xi, Руководство пользователя, Страница: 22 / 26

22
It is important to inspect and clean the generator before
every use.
Never store an generator with fuel in
the tank indoors or in a poorly
ventilated area where the fumes can
come in contact with an ignition source
such as a: 1) pilot light of a stove,
water heater, clothes dryer or any
other gas appliance; or 2) spark from
an electric appliance.
Proper care should be taken to prepare the inverter for
any storage
1. Clean the inverter as outlined in Cleaning the
Generator.
2. Siphon all gasoline from the fuel tank as best as
possible.
3. Start the engine and allow the generator to run
until all the remaining gasoline in the fuel lines and
carburetor is consumed and the engine shuts off.
4. Drain any remaining fuel from the float bowl. See
Draining the Float Bowl on page 20.
5. Change the oil (see Changing Engine Oil on
page19).
6. Remove the spark plug (see Spark Plug
Maintenance on page 21) and place about 1
tablespoon of oil in the spark plug opening. While
placing a clean rag over the spark plug opening slowly
pull the recoil handle to allow the engine to turn over
several times. This will distribute the oil and protect the
cylinder wall from corroding during storage.
7. Replace the spark plug (see Spark Plug
Maintenance on page 21).
8. Move the generator to a clean, dry place for
storage.
GENERATOR