ENGLISH
1
Navigator 900G Laser (GM-060038)
Hardware Installation
1.
You can connect the receiver to a USB port of a PC
2.
Install two AAA batteries in the mouse.
3.
Turn on your computer. The mouse can be worked.
Not
e:
If the mouse does not have connection to the receiver, press the button on
the receiver first and then press the button under the mouse for channel setting
again.
Important: Remember do not put the batteries in the wrong direction; use the
same types of batteries. Also, keep all drinks away! If any spill occurs on the
receiver, unplug the USB connector first and clean the receiver immediately.
Please switch the button to "off" under the mouse once you don't use it for a
long time, and remove the batteries if you do not use this device for at least two
