Genie Z-22 Bi-Energy, Руководство по обслуживанию и ремонту

Страница: 33 / 123

September 2015 Service and Repair Manual
Platform Components
Part No. 1268515 Z-34/22 Bi-Energy 21
Confirm the setting:
5 Turn the key switch to platform control.
6 Lift the test weight off the platform floor using
a suitable lifting device.
7 Place the test weight back onto the center of
the platform floor using a suitable lifting
device.
Result: The alarm should be off. The platform
overload indicator light should be off at both
the ground and platform controls.
Note: There may be an approximate 2 second
delay before the overload indicator light and alarm
turn off.
8 Add an additional 10 lb / 4.5 kg test weight to
the original test weight to overload the
platform.
Result: The alarm should sound. The platform
overload indicator light should be flashing at
both the ground and platform controls.
Note: There may be an approximate 2 second
delay before the overload indicator light turns on
and the alarm sounds.
9 Test all machine functions from the platform
controls.
Result: All platform control functions should
not operate.
10 Turn the key switch to ground control.
11 Test all machine functions from the ground
controls.
Result: All ground control functions should not
operate.
Note: If the platform overload system is not
operating properly, repeat steps 1 through 4.