background image

Quick Start Guide

4 Button 26 Bit Wiegand Transmitter with HID 125KHz Prox 433MHz

4

The Genie WTX-4BH-26 is a long range 4 button Wiegand transmitter powered by the most
reliable and common battery as well as being equipped with a potted proximity 
contactless smart card module.

1.1 Product Features

•  MAXSecure™ - Unique security feature
•  Wiegand output interface
•  Contactless (Button press : Up to 60m, Proximity Presentation Distance : Up to 88mm)
•  Built in eyelet - can be easily attached to a keyring
•  ETL listed - Independently tested and certified to conform to UL Standard 294
•  Rated to typically provide more than 250,000 button presses under normal conditions
•  Electronics sealed in a weather resistant enclosure (IP65)

1.2 Product Layout

1.3 Specification

Frequency

Button Press : 433MHz, Presentation : 125KHz

Marking

Date code and ID

Button Press Transmission

Rolling code and encryption

Battery

Single replaceable CR2032, 3.3V, lithium battery

Compatibility

Button Press : WRR-4 Receiver, Presentation : Pyramid readers and others

Read Range

Button Press : Up to 60m, Proximity Presentation Distance : Up to 88mm

Interface

Wiegand (26-bit industry standard and custom Wiegand formats)

LED

Integrated red LED standard (activated upon button press)

IP Rating

IP65

Operating Temperature

-40°C to +50°C, 5-95% RH (Non-condensing)

Dimensions

37 x 63.5 x 14.2 mm

Weight

20g

Содержание WTX-4BH-26








Отзывы: