Genie GS-2669 DC, Руководство по обслуживанию и ремонту

Страница: 124 / 178

November 2016 Service and Repair Manual
Fault Codes
Part No. 1272220GT GS-2669 DC • GS-3369 DC • GS-4069 DC 113
Type "CXXX" Faults, continued
DTC
Number
Message on
GCON LCD
Description Possible Causes Failure Mode
C034 C034:DCON RR ECM
FAULT TYPE 03 Valve driver failure of the right rear
drive controller. • Right rear DCON ECM. Drive functions inhibited.
C035 C034:DCON LR ECM
FAULT TYPE 03 Valve driver failure of the left rear
drive controller. • Left rear DCON ECM. Drive functions inhibited.
C036 C036:DCON RR ECM
FAULT TYPE 04 Right rear drive controller voltage
out of range. • Battery charger connected.
• Batteries to low.
• Right rear DCON ECM. All functions inhibited.
C037 C037:DCON LR ECM
FAULT TYPE 04 Left rear drive controller voltage out
of range. • Battery charger connected.
• Batteries to low.
• Left rear DCON ECM. All functions inhibited.
C038 C038:DCON RR ECM
FAULT TYPE 05 Capacitor charge failure of the right
rear drive controller. • Open on B+ or B- to the right rear drive controller.
• Right rear DCON ECM. All functions inhibited.
C039 C039:DCON LR ECM
FAULT TYPE 05 Capacitior charge failure of the left
rear drive controller. • Open on B+ or B- to the left rear drive controller.
• Left rear DCON ECM. All functions inhibited.
C040 C040:DCON RR ECM
FAULT TYPE 06 Open circuit to the PEV (B2) circuit
of the right rear drive controller. • Open circuit of the right rear motor controller harness.
• Key switch relay CR61 not closed.
• Right rear DCON or GCON ECM. All functions inhibited.
C041 C041:DCON LR ECM
FAULT TYPE 06 Open circuit to the PEV (B2) circuit
of the LEFT rear drive controller. • Open circuit of the left rear motor controller harness.
• Key switch relay CR61 not closed.
• Left rear DCON or GCON ECM. All functions inhibited.
C042 C042:DCON RR ECM
FAULT TYPE 07 Open circuit of the key switch circuit
or battery positive/negative of the
right rear drive controller. • Open circuit of the right rear motor controller harness.
• Open circuit to B+ and/or B-.
• Key switch relay CR61 not closed.
• Right rear DCON or GCON ECM. All functions inhibited.
C043 C043:DCON LR ECM
FAULT TYPE 07 Open circuit of the key switch circuit
or battery positive/negative of the left
rear drive controller. • Open circuit of the left rear motor controller harness.
• Open circuit to B+ and/or B-.
• Key switch relay CR61 not closed.
• Left rear DCON or GCON ECM. All functions inhibited.
C044 C044:DCON RR ECM
FUALT TYPE 08 Communication error of the CAN
circuit between the GCON and the
right rear motor controller. • Open circuit of the right rear motor controller harness.
• Right rear DCON or GCON ECM. All functions inhibited.
C045 C045:DCON LR ECM
FAULT TYPE 08 Communication error of the CAN
circuit between the GCON and the
left rear motor controller. • Open circuit of the left rear motor controller harness.
• Left rear DCON or GCON ECM. All functions inhibited.
C046 C046:DCON RR ECM
FAULT TYPE 09 Communication error of the CAN
circuit between the GCON and the
right rear motor controller. • Open or short circuit of the right rear motor controller
harness.
• Right rear DCON or GCON ECM. All functions inhibited.
C047 C045:DCON LR ECM
FAULT TYPE 09 Communication error of the CAN
circuit between the GCON and the
left rear motor controller. • Open or short circuit of the left rear motor controller harness.
• Left rear DCON or GCON ECM. All functions inhibited.
C048 C048:DCON RR ECM
FAULT TYPE 10 Output error of the thermal sensor
circuit of the right rear motor
controller. • Right rear DCON ECM. Performance reduced.
C049 C049:DCON LR ECM
FAULT TYPE 10 Output error of the thermal sensor
circuit of the left rear motor
controller. • Left rear DCON ECM. Performance reduced.
C050 C050:SOC MONITOR
NOT DETECTED State of charge monitor not
detected. • SOC monitor
• SOC monitor harness
• Incorrect baud rate setting on acuity
• GCON ECM. Performance reduced.
C053 C053:PCON-GCON
SOFTWARE MISMATCH Software revisions do not match
between the PCON and GCON. • C053 displayed at GCON, PCON with older software
revision connected to GCON with newer software revision.
• C053 displayed at PCON, PCON with newer software
revision connected to GCON with older software revision. All functions inhibited.