www.GenieCompany.com/commercial
|
800.843.4084
©2012 The Genie Company
|
GCL-Hss
GCL-H
|
STANDARD-DUTY HOIST OPERATOR
1. Max Door Weight and not the square footage, is the critical factor in selecting the proper operator.
2. Max Door Height 24’
3. For “Commercial Steel Insulated” category, various “backer” options are available. The chart above is based in all cases on the thickest backer available.
4. “PU-FIP” stands for “polyurethane, foamed-in-place.” If no notation is present, insulation is “polystyrene laid-in-place.”
Notes:
Accessories and Options
• Timer to Close Module
Timed close set via the LCD display from 2 seconds up to 5 minutes. Includes
pre-close warning contacts, timer hold input, auxiliary open input, normally closed
safety input, and monitored edge input.
• Auxiliary Output Module
Provides relay contacts at the open, close, and mid-stop limits. Contacts for
5-minute lamp, and “ADA” contacts set via LCD display to warn during opening,
closing or both.
• Intellicode
®
I Transmitters
Available in single up to four button, or open/close/stop models.
• Environmental Modifications
Totally enclosed non-ventilated, or fan-cooled motors available - Must be ordered
from the factory. Nema 4 or Nema 4X environmental modifications
- Must be ordered from the factory.
• UL325-2010 Approved Reversing Devices
The installation of a monitored external entrapment device is required for
momentary contact close operation on all commercial door operators. Only the
following devices, when purchased through Genie, are UL-Approved for use to meet
this requirement:
• Safe-T-Beam
®
Photoeye Kit with adjustable bracket P/N 38176R.S
1
• Impact-protected Commercial Photoeye Kit P/N OPAKPE.S
• MillerEdge ME/MT/CPT (DC or T3) 2-wire edge sensor. Must be used with
TCM (OPABTCGX.S) or Interface Module (OPAKMEIGX.S).
• Nema 4 Photoeyes P/N OPAKPEN4GX.S
1
— Default device when operator is ordered.
Construction
• Motor
AC continuous-duty motor. Motor replaceable without changing limits.
Thermally protected.
• Drive
Primary — TensiBelt™ auto tensioning poly-V J belt.
Secondary — chain and sprocket reduction.
• Brake
24VDC disc brake standard on 3/4 and 1 HP models; option on
½ HP models
• Friction Clutch
Adjustable clutch to help protect against door and operator damage.
• Precision Radial Ball Bearings
Included in critical areas throughout the powertrain.
• Emergency Hoist Manual Operation
Electrically interlocked manual hoist with floor level disconnect.
• Pre-wired to accept:
- Monitored entrapment device such as photo eyes.
- Single or 3-button control stations.
- External interlock switches.
MAX DOOR SIZE (SQ*FT) - ROLLING
Door Series
Steel Non-Insulated
Steel Insulated
Counter Doors
Grilles
Model
Max
Door Wt.
(lbs.)
16GA.
18GA.
20GA.
22GA.
24GA.
26GA.
18GA.
20GA.
22GA.
Aluminum
STL/SST
Aluminum
STL/SST
1/2 HP
998
297
333
333
416
476
476
238
238
274
126
126
350
240
3/4 HP
1220
359
419
419
552
618
N/A
276
276
309
126
126
450
310
1 HP
1440
388
461
461
606
621
N/A
297
296
382
126
126
610
450
MAX DOOR SIZE (SQ*FT) - SECTIONAL
Door Series
Commercial Steel Insulated & Non-Insulated
Thermospan
®
ThermoMark
™
Aluminum
216
216
Ins.
220
220 Ins.
2415
2415
Ins.
2411
2411
Ins.
125
150
200
200-20
5150
5200
451
452
Flush
Ribbed
Insulated
Insulated
Model
Max
Door Wt.
(lbs)
16GA.
16GA.
Ins.
20GA.
Steel
20GA.
Ins.
24GA.
24GA.
Ins.
Nominal
24GA.
Nominal
24GA.
Ins.
PU-FIP
PU-FIP
1.38”
PU-FIP
2”
PU-FIP
2”
20GA.
Ext.
PU-FIP
Raised
Panel
1.38”
PU-FIP
Raised
Panel
2”
1/8”
Glass
1.38”
1/4” or
1/2”
Glass
1.38”
1/2 HP
1120
256
220
370
256
440
340
320
320
256
360
400
300
400
380
360
240
3/4 HP
1370
330
256
440
310
530
400
320
320
256
450
450
370
460
440
400
330
1 HP
1620
380
280
500
370
570
410
320
320
256
480
480
420
500
480
400
400
Dealer Imprint Area
AMPERAGE RATING - 60Hz
Hp
115V 1Ø 208V 1Ø 230V 1Ø 208V 3Ø 230V 3Ø 460V 3Ø 575V 3Ø
1/2
10
5
5
3
3
3
2
3/4
11
6
6
3
4
3
2
1
14
7
7
4
4
3
2
