Genevac HT-24 Скачать руководство пользователя страница 60 | Manualshive

Страница: 60 / 60

Genevac HT-24 Скачать руководство пользователя страница 60

Genevac Limited

The Sovereign Centre

Farthing Road

Ipswich

IP1 5AP

United Kingdom

Sales and Service Hotlines

Service: +44 (0) 1473 243000

Sales: +44 (0) 1473 240000

Fax: +44 (0) 1473 461176

Email:

[email protected]

[email protected]

[email protected]

Web site:

http://www.genevac.com

Genevac Inc

SP Industries

815 State Route 208

Gardiner

NY 12525

United States of America

Sales and Service Hotline

(1) 845 267 2211

Fax (1) 845 267 2212

Email:

[email protected]

[email protected]

Useful Information

Read these instructions before operating
the evaporation system and keep them
near the system for easy reference. Your
attention is drawn in particular to the

Safety

section.

These instructions are correct at time of
going to press and may be subject to
change without notice.  Some of the
features and software functions described
within this user manual may not apply to
equipment manufactured before this
manual’s publication date; this includes
systems that have been upgraded.

No part of these instructions may be
reproduced in any form or be processed,
duplicated or distributed by electronic or
optical means without the written
permission of Genevac Limited.

If you need to contact Genevac for
assistance, use either the telephone or fax
Hotlines shown.  Please have the
instrument serial number at hand.
Alternatively, email or visit our web site.

The evaporator should not be discarded in
your regular disposal stream. Contact your
Representative or Genevac for proper
disposal instructions.

Within the EU,

it is Genevac’s

responsibility under the WEEE directive to
provide for the recycling of Genevac
products.

All rights reserved, © Genevac Ltd 2014.

«
...
58
59
60

Содержание HT-24





























































Отзывы:

Нет отзывов