Genevac HT-24 Скачать руководство пользователя страница 31

Страница: 31 / 60

User Manual

Genevac HT-24

10-1562 Issue 3-7 March

2014

Controls menu

Adjust Screen Brightness:

adjusts the screen viewing angle (not available on later

evaporators with high contrast screens).

Keypress Beep On / Off:

turns off the key-press beep response.

User Intervention Beeps On / Off:

turns off the user-intervention beep response.

End of Run Beeps On / Off:

turns off repeating end of run alarm.

Press the

ESC

key to leave these menu screens.

Menu bar

The default position for the horizontal menu bar cursor is with

START

highlighted. Press the

cursor direction

left and right keys to return the cursor to

START

after using any of the

other menu options.



START:

starts the highlighted run



EDIT:

alternative route to the

Run Data

screen



GRAPH:

shows the graph of the last completed run



CLEAR:

clears the highlighted run profile, deleting all run profile settings



COPY TO:

copies the highlighted run profile may to a different location



DRAIN:

drains the condenser



DEFROST:

enters the

Condenser Defrost



FLUSH:

not applicable on HT-24



OPTIONS:

enters the

Options Menu

Содержание HT-24





























































Результаты поиска

Содержание HT-24

Отзывы:

Genevac HT-24, Руководство пользователя, Страница: 31 / 60

Результаты поиска

Содержание HT-24

Отзывы: