Genetec SV-32, Быстрый старт

Страница: 13 / 16

SV-32 Network Security Appliance Quick Start Guide Getting started
EN.804.003-V6(1) 8

Limited desktop icons (recycle bin, libraries)

Cannot shut down/restart Windows
Logging on
The first time you start the SV-32, you are automatically logged in as the Operator
user and the
SV Control Panel and SV-32 setup wizard will open to guide you
through the initial setup of your system.
What you should know
•
You will only be logged on to Windows automatically the first time the
machine is started. After that, a
Username and Password is required to log on
to the machine.
•
The SV Control Panel will only open automatically the first time the machine is
started. After that, a user will be prompted to enter Admin credentials to have
access to the
SV Control Panel .
To log on to SV Control Panel:
1
When prompted, enter the admin user credentials.
2 Click
Connect
.
The SV Control Panel opens.
For more details about using the SV Control Panel to configure your system, see
the SV Control Panel User Guide . This guide is accessible by clicking the Control
Panel: User guide (PDF) link on the About page in the SV Control Panel , or from
the GTAP Documents page, at https://gtap.genetec.com .