Sony
genetec.com | Omnicast Video Unit Configuration Guide 4.8 SR3
82
EN.100.007-V4.8.C3.(1)
Test the Sony PTZ pattern
There are two ways to test a PTZ pattern:
1
Test the PTZ pattern in the Live Viewer.
a
In the
Live Viewer
, double-click the Sony PTZ camera to be tested.
b
From the
Pattern
drop-down list in the
Tool Pane
, select a pattern to play.
NOTE
Pattern 0 in Omnicast represents preset tour A on the Sony unit, 1=B, 2=C, 3=D,
and 4=E.
c
Click
Play
(
).
2
Test the PTZ pattern in the Config Tool.
a
In the
Config Tool
, select the Sony PTZ motor to configure.
b
Click the
Test
tab.
c
To view the current position of the camera, click the
Live Video
button.
d
From the
Pattern
drop-down list, select a pattern to play.
NOTE
Pattern 0 in Omnicast represents preset tour A on the Sony unit, 1=B, 2=C, 3=D,
and 4=E.
e
Click
Play
(
).
Using the Copy configuration tool
When using the Copy configuration tool in Omnicast with Sony 5th Generation units, the
camera configuration is dependant on the unit configuration. Therefore, you must copy the unit
configuration before copying the camera configuration.
