Panasonic
genetec.com | Omnicast Video Unit Configuration Guide 4.8 SR3
68
EN.100.007-V4.8.C3.(1)
Configure capture resolutions
For Panasonic megapixel cameras (for example, 1.3 megapixels or 3.0 megapixels) to stream at
the correct resolution, you must configure the image capture mode on the unit’s Web page
before adding the unit in Omnicast.
1
Open the unit’s Web page.
2
Click
Setup > Image
.
3
From the
Image capture mode
drop-down list, select the desired resolution.
NOTE
On some models you may have to select an Aspect ratio instead of an Image capture
mode
4
Click
Set
.
Configuring edge analytics for WJ-NT314 units
To use edge analytics with Panasonic WJ-NT314 encoders, it must be configured for each active
channel using the unit’s Web page.
Configuring WV-SC385 (DG-SC385) units
Before adding Panasonic WV-SC385 (DG-SC385) units to the Archiver, make sure the
multicast/unicast port number is in between 1024-50000, inclusively.
