GeneSys Elektronik GmbH
In der Spöck 10
77656 Offenburg
Germany +49 (0) 781 96 92 79
–
0 [email protected] www.genesys-offenburg.de
ADMA 3.5 Quick Start Guide.docx
Seite / Page 18 / 32
6
CONNECTING THE ADMA WEBINTERFACE
The Webinterface is integrated in the ADMA. To access, the following settings of the network
connection must be done:
1.
Open Network Connections by clicking the Windows
Start
button. Open the
Control
Panel
and change to the menu
Network and Sharing Center
, click View
network
connections
.
2.
Right-click the interface you like to adapt, then open the
Properties
dialog. If you're asked
for an administrator password or confirmation, enter the password or provide the
required confirmation.
3.
Click the
Networking
tab. Under
This connection uses the following items
, choose
Internet Protocol Version 4 (TCP/IPv4),
then choose Properties.
Figure 11 The Network Connection Properties dialog box