Copyright 2016 Luminite Electronics Ltd
All rights reserved. Unauthorised duplication of this handbook by any means
mechanical or electrical, is strictly prohibited without the express written permission of
Luminite Electronics Ltd.
Luminite Electronics Ltd acknowledge all registered trademarks
Luminite Electronics Ltd reserve the right to make changes to this handbook and to its
products without prior notice in order to improve design or performance characteristics.
PRE-INSTALLATION NOTES
Unpacking
.
On receipt, inspect the package and contents for signs of damage. If damage has oc-
curred, advise the carrier and/or suppliers immediately. Inspect the contents to confirm
that all items are present and undamaged. If any items are missing or damaged, contact
the supplier immediately. It is advisable that the original carton is retained as this forms
the safest transport container in the event that a unit has to be returned for any reason.
Servicing.
This unit should not require general servicing. Any repair work should only be
undertaken by Luminite Electronics Ltd.
Moisture.
Do not expose the internal electronics of this unit to moisture i.e. take care during
installation not to allow rain or damp into the product. When the product is sealed it is
water resistant to IP56.
Box Contents.
1 x
GENESIS
LGKSQ Key Point
1 x Relay module
LGKSQ Wireless Key Point Installation Handbook
Page 2.
LGKSQ Wireless Key Point Installation Handbook
Page 11.
LGKP & LGKS Specification.
RF input
434.525Mhz -120dbi
RF output
434.525Mhz 10m/w
Antenna
Internal.
RF range
300metres line of sight
Encoding
Manchester with Rolling code and full encryption
Communication
Full DUPLEX
Security
5 digit PIN 248,832 differs
Operating voltage
9volts DC
Battery type
PP3 Alkaline or Lithium 9 volts. (Not supplied)
Battery life
1 year alkaline. 2 years lithium on average usage.
Status indication
Piezo sounder and LED’s
Enclosure
LGKS ABS L130 W84 H69mm IP56
Anti tamper
3 axis inertia sensor
