Generex CS141 Series Скачать руководство пользователя страница 78 | Manualshive

Страница: 78 / 110

background image

Date: 2021-08-17

Copyright of the European Union is effective (Copyright EU) (c) 2021 GENEREX Systems GmbH, Hamburg, Germany, All rights reserved

TEL +49(40)22692910 - EMAIL [email protected] - WEB www.generex.de (This and all other product datasheets are available for download.)

78

Extended System Monitoring

The SITEMANAGER 6 provides different methods to communicate a problem:

There are status LEDs on the front that are logically assigned to all possible connections:

Digital Outputs

LED colour: green
These LEDs light up in case of a switched a digital output

Digital Input

LED colour: red
These LEDs flash when a problem has been detected.
The flashing becomes a static light as soon as the error has been confirmed within the SITEMANAGER 6.

Analog Alarms

LED colour: red
These LEDs flash when a problem has been detected.
The flashing becomes a static light as soon as the error has been confirmed within the SITEMANAGER 6.

Die System Status LED’

s

This LED is assigned to the BACS system, please refer to the BACS manual.

Special feature: Power LED

LED colour: green

The power LED provides information about different system states:

Die LED…

-

Lights up static green when the system has been properly connected internally and is functioning.

-

Flashes green when the BOOT process has been initiated or there is no connection to the CS141.

In addition to the LEDs, you can use the sensor monitor screen to obtain more detailed information about the switching states.
The upper status bar provides quick information after logging in:

As soon as you confirm the in the Sensor Monitor, the LED will behave accordingly:

The sensor monitor will initially assume that this state is wanted in some way:

However, the LED on the front bar will continue to glow red statically to indicate a corresponding fault during the next
maintenance.

«
...
76
77
78
79
80
...
»

Содержание CS141 Series















































































































Отзывы:

Нет отзывов

Похожие инструкции для CS141 Series

Бренд: cable matters Страницы: 13

Token-Ring Network PC Adapter

Бренд: IBM Страницы: 118

Бренд: SUNRICH TECHNOLOGY Страницы: 5

Бренд: CC&C Страницы: 30

Бренд: ZNYX Страницы: 13

EZ Connect N SMCWUSBS-N

Бренд: SMC Networks Страницы: 64

Бренд: IOGear Страницы: 60

F8T031 - Bluetooth Wireless USB Printer Adapter Print Server

Бренд: Belkin Страницы: 93

Бренд: TP-Link Страницы: 37

Бренд: Clarion Страницы: 15

Бренд: 3idee Страницы: 8

Бренд: Curtis Computer Страницы: 2

Бренд: Adaptec Страницы: 5

Бренд: Linksys Страницы: 10

Бренд: Canon Страницы: 52

Бренд: Canon Страницы: 51

Бренд: Canon Страницы: 2

Бренд: Canon Страницы: 1

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды