WARRANTY INFORMATION
General Tools & Instruments’ (General’s) DMM52FSG or
DMM53FSG Rugged Service Multimeter is warranted to
the original purchaser to be free from defects in material
and workmanship for a period of one year. Subject to
certain restrictions, General will repair or replace this
instrument if, after examination, the company determines
it to be defective in material or workmanship. The
warranty period begins on the date of purchase. You are
encouraged to register your product online. General will
extend your warranty an additional 60 days if you register
at www.generaltools.com/ProductRegistry.
This warranty does not apply to damages that General
determines to be from an attempted repair by non-
authorized personnel or misuse, alterations, normal wear
and tear, or accidental damage. The defective unit must
be returned to General Tools & Instruments or to a
General-authorized service center, freight prepaid and
insured.
Acceptance of the exclusive repair and replacement
remedies described herein is a condition of the contract
for purchase of this product. In no event shall General be
liable for any incidental, special, consequential or
punitive damages, or for any cost, attorneys’ fees,
expenses, or losses alleged to be a consequence of
damage due to failure of, or defect in any product
including, but not limited to, any claims for loss of profits.
Register now at www.generaltools.com/ProductRegistry
to receive a 60-day extension to your warranty.
17
DMM52&53FSG Manual_R1-FINAL-102114_Layout 1 11/21/14 12:03 PM Page 17
