Document #: GP-UM-PMD-1000-21
Page 13 of 122
4.2.2 SETUP:
Pressing the SETUP key accesses a setup menu that allows the user to configure the
GPIB address (range 1~30) and operating wavelength (87 ITU grid channels for the C-
band model), to query the IP address, and to clear the PMD sequence memory banks.
When the SETUP key is pressed, the LCD displays 6 menu options on 3 screens:
Note: the * next to the dynamic or static IP line indicates the PMDPro’s current Ethernet
communication mode. In this example, the PMDPro is set for dynamic IP addressing.
Use the up and down arrow keys to move between menu options and the ENTER key (the
center key in the arrow keypad) to select the desired option.
1.
ITU FREQ CHANNEL:
Sets the operation wavelength. Use the left and right arrow keys to move the
cursor and the up and down arrow keys to increment the digits to select the
desired ITU channel number (range 1-87 for C-band model). The corresponding
frequency and wavelength are displayed.
Once the value is set, pressing the ENTER key executes the setting and returns
the display to the SETUP menu.
2.
GPIB ADDRESS:
This option sets the GPIB address for the PMDPro. When this option is selected,
the screen displays:
GPIB ADDRESS: 05
(Range: 01 to 30)
Ch: C037
(193.40THz)
λ
: 1550.12 nm
5. SET STATIC IP
↑
6. INIT PMDE MEM-BANK
3. GET DYNAMIC IP *
↑
4. GET STATIC IP
↓
1. ITU FREQ CHANNEL
2. GPIB ADDRESS
↓
