General Monitors S800, Инструкция по эксплуатации

Страница: 23 / 32

Model S800
The splash guard is recommended for reducing dust and rock damage to the sensor
head. The S800 MUST be calibrated with the splash guard in place.
Figure 9: Splash Guard, Picture
6.4 Dust Guard Assembly
The Dust Guard Assembly (UCISC #452328) is a simple, threaded stainless steel cylinder
with a wire screen at one end. It is easily removed for cleaning and/or replacement of the
disposable screen.
This General Monitors accessory is specifically designed to prevent dust and particulate
matter form reaching the sensor flame arrestor. Such debris can plug the screen and limit
the amount of gas reaching the active surface of the sensor.
Figure 10: Dust Guard
The Dust Guard is also available in a kit (UCISC #543204) with twelve replaceable
screens (Figure 11).
Figure 11: Dust Guard Kit
19