Checkweigher user’s manual
6
3
Safety instructions
Trained Operator
The device must be operated by people who have been instructed in the
operating procedure.
The operator must read and understand the safety instructions in this manual.
Even though the device is equipped with all the required safety installations,
injuries to the operating personnel or damage to property is possible if the safety
instructions are not heeded.
Protective and safety devices
Main switch
The main switch is on the side of the switch cabinet. Switch the device off at the
main switch in the following situations:
- In the event of impending risk.
- When cleaning and maintenance work is being carried out on the outside of the
control cabinet.
Sources of risk related to the system
Components that start automatically
The device is designed for fully-automatic operations.
During fully-automatic operation, the transport belts and rejector, for example,
can be switched on and off automatically.
Keep fingers, hands or long hair away from the moving parts of the device.
Switch off the device by using main switch before carrying out cleaning and
maintenance work.
Electrical voltage in the control cabinet even when the
main switch is switched off!
Risk to life from an electrical charge.
Before carrying out work in the control cabinet, cut off
power and disconnect the power connector.
Work in the control cabinet must be carried out by
qualified trained personnel.
