Powerful 2 HP motor with thermal overload
protection.
Front and rear fold-down extension tables
(12 L x 15 1/4 W) with end rollers for
smooth easy stock feeding.
Top mounted return rollers for smooth
stock handling for consecutive
planning/multiple passes.
Convenient power cord storage brackets
and inset lifting handles.
Dual position depth of cut adjustment
handle mounts left or right – one full
rotation equals 1/16”.
Dual feed speeds for smooth planning
with either soft or hard wood.
Adjustable pre-set depth gauge for
accurate repeat cuts.
Easy to read graduated scale in both
inches and metric indicates workpiece
thickness.
Safety On/Off switch with key. Unit cannot
be started when key is removed from
switch.
Snipe eliminating head lock.
Depth of cut indicator.
Includes magnetic knife setting guide.
TABLE AREA WITH EXTENSIONS (L X W)
36 5/8” X 15 1⁄4” (930 x 387 mm)
MAXIMUM PLANING WIDTH
13” (330 mm)
MAXIMUM THICKNESS OF STOCK
6” (152 mm)
MINIMUM THICKNESS OF STOCK
1⁄8” (3 mm)
MINIMUM LENGTH OF STOCK
5” (127 mm)
MAXIMUM DEPTH OF CUT (FULL WIDTH)
1⁄16” (1.5 mm)
KNIVES
2 - DOUBLE EDGED
CUTTERHEAD SPEED
9500 RPM
FEED SPEEDS (2)
18 & 26 FPM
CUTS PER INCH
88 / 61
MOTOR
2 HP, 120 V, 1 Ph, 15 A
REVISION 1 - JUNE 7/07
© COPYRIGHT GENERAL INTERNATIONAL 06/2007
