General DataComm SpectraComm SDT, Инструкция по установке и эксплуатации

Страница: 49 / 74

The Web Interface Introduction to Web Management
076R174-000 SpectraComm SDT 4-3
Issue 4 Installation and Operation Manual
Command Line Web Screen
Commands entered at the Command Line web screen operate exactly the same as at the telnet/
terminal CLI interface. The Command line web page displays a series of tables that allow users and
supervisors to execute commands and associated arguments by clicking on the links in the table.
The top level command menu is shown below. When you click a command from the menu, any
required arguments for that command appear. To return to the command line top menu from any
argument screen, use the browser Back button, the SC-SDT Command Line selection, or click the
Top Menu link at the bottom of an argument table. For a detailed guide to CLI, refer to Appendix
A, Application Guidelines .
Note
Supervisor Access is required for configure and reboot commands; thus, with User Access these
commands will not be displayed.
Configuration commands that are restricted to ADMIN mode will not be displayed. You must logout of the
web interface and make a Telnet or terminal connection in ADMIN mode to access/execute those commands.
Table 4-1 Command Line Web Screen
Field Description
clear Displays a selectable list of sub-commands that will clear arp-cache entries and
counters on one or more ports.
configure
(Supervisor Access Only) Displays a selectable list of sub-commands that are used to configure port and
operational parameters.
help Displays a read-only display describing online help, the command access
modes, some common sub-commands and arguments, and information on
downloading configuration batch files.
show Displays a selectable list of sub-commands that show SC-SDT status and
several operating and configuration parameters.
reboot
(Supervisor Access Only) Halts SC-SDT operation and performs a reboot using existing configuration.
services Displays the status of HTTP, SNMP, TELNET and TFTP services
(Enabled or Disabled)
logout Logs out of the session and returns to the SC-SDT login authorization screen.
YOUR SYSTEM NAME (172.16.45.203)
clear
help
show
services
logout
Reset functions
Description of the command line interface and help system
Show system parameters
Show/Enable/Disable HTTP, SNMP, TELNET & TFTP Services
End this web session