General DataComm SpectraComm SDT, Инструкция по установке и эксплуатации

Страница: 21 / 74

Installation & Connections Overview
076R174-000 SpectraComm SDT 2-3
Issue 4 Installation and Operation Manual
Note
Straight-thru extenders are required on the sync interface cables when the distance exceeds the 10 ft
standard.
Table 2-2 Shelf Systems and Optional Equipment
Item Description Part Number
SpectraComm
Single Slot
Enclosures RA 1000 AC Standalone Enclosure 010M301-001
SC 1002 DC Standalone Enclosure 010M301-006
SC 1012 DC Standalone Enclosure 010B302-001
SpectraComm
Two Slot Shelves SpectraComm 2000 Shelf, two slots, non-redundant power supply 010B226-001
SpectraComm 2000 Shelf, two slots, redundant power supply 010B226-002
SpectraComm
16 Slot Shelves MS-2 Model 1, includes two 8-slot, dual RJ45 Zone 1 connector panels,
100/120 VAC 010M054-001
MS-2 Model 2, includes two 8-slot, dual RJ45 Zone 1 connector panels,
-48, 60 VDC 010M055-001
MS-2 Model 3, includes two 8-slot, dual RJ45 Zone 1 connector panels,
220/240 VAC 010M056-001
MS-2 Model 7, includes one 16-slot, 50-pin/universal Zone 1 connector
panel, 100/120 VAC 010M073-001
MS-2 Mod. 8, includes one 16-slot, 50-pin/universal Zone 1 connector
panel, 220/240 VAC 010M074-001
MS-2 Mod. 9, includes one 16-slot, 50-pin/universal Zone 1 connector
panel, -48, 60 VDC 010M075-001
MS-2 Mod. 10, includes two 8-slot, dual RJ45 Zone 1 connector panels,
-48, 60 VDC, (Redundant Power) 010M070-001
MS-2 Mod. 12, includes one 16-slot, 50-pin/universal Zone 1 connector
panel, -48, -60 VDC (Redundant Power) 010M076-001