General DataComm SC-ADT 16 Por, Руководство по установке и эксплуатации

Страница: 83 / 106

Additional Features Monitoring Features
076R172-000 SpectraComm ADT 5-15
Issue 6 Installation and Operation Manual
Alarm Log
The Alarm log shows a history of the last 100 Alarm events saved to the log. The Alarm log is not
saved when the unit reboots.
• To show the last 100 logged alarms, type:
show log alarm
• To clear the log, type:
clear log alarm
Figure 5-10 Example: Alarm Log
General Status
The SC-ADT provides a display that shows the current status of various port features, such as port
parameters, the Override feature, the Connect/Disconnect log, ACL and the Telnet Menu feature.
These features are disabled, by default.
• To show the current status of these features, type:
show ports general
Figure 5-11 Example: General Status Display
Alarm Log in reverse chronological order
### -----------------------------Description----------------------------------
3: Contact alarm logging started (GMT 18:51:21 4/16/2009)
2: Contact sensing started (GMT 14:17:19 10/19/2009)
1: Alarm logging started (Sysup 8 days 6 hours 19 mins 53 secs)
ADT-16% show ports general
_____________________________Port Parameters_________________________________
Inactivity
Port Admin Telnet Timer Flow
Name State Mode ACL Port Status Monitor (secs) Comms Control
------ ----- ----- --- ---- ---------- ------- -------- ---------- --------
port1 OFF Term 1 2001 Idle ON 900 9600 8N1 none
port2 OFF Term 1 2002 Idle ON 900 9600 8N1 none
port3 OFF Term 1 2003 Idle ON 900 9600 8N1 none
port4 ON Term 1 2004 Idle ON 900 9600 8N1 none
port5 OFF Term 1 2005 Idle ON 900 9600 8N1 none
port6 OFF Term 1 2006 Idle ON 900 9600 8N1 none
port7 OFF Term 1 2007 Idle ON 900 9600 8N1 none
port8 OFF Term 1 2008 Idle ON 900 9600 8N1 none
port9 OFF Term 1 2009 Idle ON 900 9600 8N1 none
port10 OFF Term 1 2010 Idle ON 900 9600 8N1 none
port11 OFF Term 1 2011 Idle ON 900 9600 8N1 none
port12 OFF Term 1 2012 Idle ON 900 9600 8N1 none
port13 OFF Term 1 2013 Idle ON 900 9600 8N1 none
port14 OFF Term 1 2014 Idle ON 900 9600 8N1 none
port15 OFF Term 1 2015 Idle ON 900 9600 8N1 none
port16 OFF Term 1 2016 Idle ON 900 9600 8N1 none
Escape sequence for connect from CLI: "^^^"
TELNET Menu for Terminal Server is enabled.
Override for "port in use" is disabled.
Logging of port connect/disconnect messages is disabled.