![background image](http://html1.mh-extra.com/html/general-datacomm/sc-adt-16-por/sc-adt-16-por_installation-and-operation-manual_2210292070.webp)
Additional Features
Authentication Protocol
5-2
SpectraComm ADT
076R172-000
Installation and Operation Manual
Issue 6
Authentication Protocol
In addition to local authentication where the usernames and passwords reside on each individual
SC-ADT device, SC-ADT can be configured for authentication. This capability
supports the CISCO protocol for authentication between the SC-ADT device and the
server. When is enabled, the server becomes the central point
for managing network-wide usernames and passwords. This is especially useful when provisioning
SC-ADT devices in large networks.
usernames and passwords are authenticated for all access methods: craft, Telnet, and
HTTP. You must be logged in with ADMIN privileges to access SC-ADT’s commands.
Detailed information and configuration procedures are provided in the paragraphs below.
•
For help in setting parameters, type:
configure ?
•
To show the status of , type:
show
Figure 5-1
Help and Status Displays for
----------------------------------------------------------------
Authentication is disabled.
Console Authentication is disabled.
Server IP:
default key:
default timeout: 5
max attempts: 3
admin username: $gdc_adt_admin$
supv username: $gdc_adt_supervisor$
en -pass state: disabled
fallback state: enabled
banner:
local banner:
----------------------------------------------------------------
___________Help for "configure "______________________________
account Accounting enable/disable (not supported yet)
authen Authentication enable/disable
author Authorization enable/disable (not supported yet)
attempts Set max number of attempts to login; requires 1 parameter(s)
banner Optional message when starting /local authentication
console Enable/Disable console user authentication
admin Define username for Admin password; requires 1 parameter(s)
supv Define username for Supervisor password; requires 1 parameter(s)
en-pass Allow use of Server IP address
fallback Enable/Disablefallback to local authentication
server Specify Server IP address
key Set default encription key; requires 1 parameter(s)
timeout Default timeout for Server to reply; requires 1 parameter(s)
testing Authentication testing
Содержание SC-ADT 16 Por
Страница 6: ...iv SpectraCommADT 076R172 000 Installation and Operation Manual Issue 6 Table of Contents...
Страница 92: ...Additional Features SNMP Traps 5 24 SpectraCommADT 076R172 000 Installation and Operation Manual Issue 6...
Страница 105: ......
Страница 106: ...The Best Connections in the Business...