General Components 2600A, Руководство пользователя

Страница: 11 / 28

info@generalcomponents.ca
+1 (800) 517-7740
3.2 Installation
Before mounting indoor and outdoor units, following
points should be considered:
➢
Refrigerant line length: lines should reach both units
comfortably, with some slack. Avoid strain tension on
the fittings.
➢
Proximity to APU or other power source: outdoor unit
should be located as close as practicable to the power
source.
➢
Exposure to the elements and moving parts: provide
enough clearance to prevent mechanical damage, dust,
splashes of water.
➢
Supporting walls should be strong enough to withstand
equipment weight and provide adequate grip for the
mounting screws.
➢
Ease of access: Units should be easily accessible for
service and maintenance.
3.2.1 Mounting the Outdoor Unit (condenser)
Remove the cover before installing the unit.
Condensing unit should be mounted upright onto a flat, even
surface. Unit dimensions are
681× 465×192 mm (26.8” x
18.3” x 7.6”). Distance between mounting holes is 418±1mm
x 505± 1mm (16.46” x 19.88”). The unit is secured using
M8X100 bolts provided with the kit. Recommended
tightening torque is 15Nm.