manualshive.com logo in svg

Generac Power Systems QuietSource 005262-0, Руководство пользователя

Владельцы удобного генератора Generac Power Systems QuietSource 005262-0 могут с уверенностью использовать их природу доступные и надежные резервные источники энергии. Чтобы узнать обо всех функциях и настройках генератора, вы можете загрузить бесплатное Руководство пользователя с manualshive.com.

Поделиться
Скачать
background image

SPECIFICATIONS

GENERATOR

Type ............................................................................. Synchronous
Rotor Insulation ................................................................... Class H
Stator Insulation .................................................................. Class H
Total Harmonic Distortion ..........................................................<5%
Telephone Interference Factor (TIF) ..........................................< 50
Alternator Output Leads 3-phase ........................................... 4-wire
Bearings .........................................................................Sealed Ball
Coupling .......................................................................Flexible Disc
Load Capacity (Standby Rating) ............................................45kW*
*

  NOTE: Generator rating and performance in accordance with ISO8528-5, BS5514, SAE J1349, 

ISO3046 and DIN 6271 Standards. KW rating is based on LPG fuel and may derate with natural 

gas.

Excitation System ....................................................................Direct
Generator Output Voltage/kW - 60 Hz 

kW 

Amp  CB Size

  120/240V, 1-phase, 1.0 pf 

45 

188 

200

  120/208V, 3-phase, 0.8 pf 

45 

156 

175

  277/480V, 3-phase, 0.8 pf 

45 

68 

80

 Generator Locked Rotor KVA Available @ Voltage Dip of 35%
  Single-phase or 208, 3-phase ............................................ 80 KVA
  480V, 3-phase .................................................................. 100 KVA

ENGINE

Make ................................................................................... Generac
Model ..................................................................................... In  Line
Cylinders and Arrangement ............................................................ 4
Displacement ....................................................................... 2.4  Liter
Bore ...................................................................................... 3.41  in.
Stroke ................................................................................... 3.94  in.
Compression Ratio ...............................................................8.5-to-1
Air Intake System ...............................................Naturally Aspirated
Valve Seats ....................................................................... Hardened
Lifter Type .......................................................................... Hydraulic

Engine Parameters

Rated Synchronous RPM ..............................................60 Hz, 3600
HP at rated kW ..................................................................60 Hz, 71

Exhaust System

Exhaust Flow at Rated Output 60 Hz .................................. 429 cfm
Exhaust Temperature at Rated Output ................................ 1150° F

Combustion Air Requirements (Natural Gas)

Flow at rated power, 60 Hz ................................................. 144 cfm

Governor

Type .................................................................................. Electronic
Frequency Regulation ...................................................Isochronous
Steady State Regulation ......................................................± 0.25%

Engine Lubrication System

Type of Oil Pump ...................................................................... Gear
Oil Filter ............................................... Full Flow Spin-on, Cartridge
Crankcase Oil Capacity ....................................................4 U.S. qts.

‹

‹

COOLING SYSTEM

Type ...................................................Pressurized  Closed  Recovery
Water Pump .................................................................... Belt Driven
Fan Speed .........................................................................2150 rpm
Fan Diameter .....................................................................22 inches
Fan Mode ................................................................................ Puller
Air Flow (inlet air including alternator and
  combustion air) ...........................................................2725 ft

3

/min.

Coolant Capacity ........................................................ (3.0 U.S. gal.)
Heat Rejection to Coolant ..........................................173,000 Btu/h
Maximum Operating Air Temp. on Radiator ..............60° C (150° F)
Maximum Ambient Temperature ................................50° C (140° F)

FUEL SYSTEM

Type of Fuel ......................................... Natural Gas, Propane Vapor
Carburetor ...................................................................... Down Draft
Secondary Fuel Regulator .................................................Standard
Fuel Shut-off Solenoid ........................................................Standard
Operating Fuel Pressure  ...................... 5 in. - 14 in. Water Column

Fuel Consumption - ft

3

/hr (Natural Gas/LPV)

 Exercise 

25% 

50% 

75% 

100%

 Cycle 

Load 

Load 

Load  Load

 102/40.4  194/77.1  373/148  520/206.3 720/286

ELECTRICAL SYSTEM

Battery Charge Alternator ............................................12V, 30 Amp
Static Battery Charger ............................................................2 Amp
Recommended Battery ...................................... Group 26, 525CCA
System Voltage .....................................................................12 Volts

Voltage Regulator

Type .................................................................................. Electronic
Sensing ........................................................................ Single-phase
Regulation ................................................................................± 1%
Features ................................................. V/F Adjustable, Adjustable 

Voltage and Gain LED Indicators

Power Adjustment for Ambient Conditions

Temperature Deration
  3% for every 10° C above °C ..................................................... 25
  1.65% for every 10° above °F .................................................... 77
Altitude Deration
  1% for every 100 m above m ................................................... 183
  3% for every 1000 ft. above ft. ................................................. 600

Controller .................................................R-200

‹

‹

‹

6-1

Standby Generator Sets

Specifications

GenSpec020  Rev.

 0  02/06

Содержание QuietSource 005262-0

























































Отзывы:

Нет отзывов

Похожие инструкции для QuietSource 005262-0

Kaco blueplanet 15.0 TL3 Quick Manual preview
blueplanet 15.0 TL3
Бренд: Kaco Страницы: 188
Kaiser Baas KBA03026 Troubleshooting Manual preview
KBA03026
Бренд: Kaiser Baas Страницы: 3
SANDIA aerospace SAE5-35 Installation Manual preview
SAE5-35
Бренд: SANDIA aerospace Страницы: 20
Fagor SV2 Installation Manual preview
SV2
Бренд: Fagor Страницы: 12
Vector Industrial Series VEC023 Owner'S Manual & Warranty Information preview
Industrial Series VEC023
Бренд: Vector Страницы: 8
OST OmniConverter GPoE+/S User Manual preview
OmniConverter GPoE+/S
Бренд: OST Страницы: 10
UNICOM GEP-5001TF-C Specifications preview
GEP-5001TF-C
Бренд: UNICOM Страницы: 1
Vector Lil' Beaver 2.0 User Manual preview
Lil' Beaver 2.0
Бренд: Vector Страницы: 16
Alca Power IRP3000-12 User Manual preview
IRP3000-12
Бренд: Alca Power Страницы: 8
Kaco blueplanet 1502xi Instruction Manual preview
blueplanet 1502xi
Бренд: Kaco Страницы: 56
ImmediaTV ITV-IP360c User Manual preview
ITV-IP360c
Бренд: ImmediaTV Страницы: 93
TC Communications TC3400 User Manual preview
TC3400
Бренд: TC Communications Страницы: 31
Baumer Hubner Berlin POG 86 Mounting And Operating Instructions preview
Hubner Berlin POG 86
Бренд: Baumer Страницы: 36
CNBOU Helios III Series Manual preview
Helios III Series
Бренд: CNBOU Страницы: 27
Soarland & Hexin HXSP-09F69 Manual preview
HXSP-09F69
Бренд: Soarland & Hexin Страницы: 2
Brusa BSC6 Manual preview
BSC6
Бренд: Brusa Страницы: 4
Black Box 232/CL-E Manual preview
232/CL-E
Бренд: Black Box Страницы: 23
Peak PCAN-Router FD User Manual preview
PCAN-Router FD
Бренд: Peak Страницы: 28

Бренды по названию

Популярные бренды

Загрузить еще бренды