manualshive.com logo in svg

Generac Power Systems MAGNUM MLT4060MVD, Руководство пользователя

Поделиться
Скачать
Generac Power Systems MAGNUM MLT4060MVD Скачать руководство пользователя страница 7

Introduction and Safety

Owner’s Manual for MLT4060MVD Light Tower

3

Explosion and Fire Hazards

Trailer Hazards

Electrical Hazards

(000105)

DANGER

Explosion and Fire. Fuel and vapors are 
extremely flammable and explosive. Add fuel 
in a well ventilated area. Keep fire and spark 
away. Failure to do so will result in death 
or serious injury.

 

(000147)

WARNING

Risk of Fire. Unit must be positioned in a
manner that prevents combustible material
accumulation underneath. Failure to do so
could result in death or serious injury.

(000110)

WARNING

Risk of Fire. Hot surfaces could ignite 
combustibles, resulting in fire. Fire could 
result in death or serious injury.

WARNING

Personal injury. Trailer must be securely coupled to 
the hitch with the chains correctly attached. Uncoupled 
or unchained towing could result in death or serious
injury.

(000233a)

Personal injury. Do not operate unit during transport. 
Doing so could result in death, serious injury, or 
property damage.

(000231a)

WARNING

(000234a)

WARNING

Crushing hazard. Verify unit is properly secured and 
on level ground. An unsecured unit can suddenly roll 
or move, causing death or serious injury.

WARNING

  

Property or Equipment Damage. Tighten wheel lug 
nuts after first 50 miles to factory specifications. 
Failure to do so could result in death, serious injury, 
property or equipment damage.

(000235)

(000145)

DANGER

Electrocution. In the event of electrical accident,  
immediately shut power OFF. Use non-conductive  
implements to free victim from live conductor. Apply  
first aid and get medical help. Failure to do so will  
result in death or serious injury

.

(000104)

DANGER

Electrocution. Water contact with a power 
source, if not avoided, will result in death 
or serious injury.

(000144)

DANGER

Electrocution. Contact with bare wires, 
terminals, and connections while generator 
is running will result in death or serious injury.

(000152)

DANGER

Electrocution. Verify electrical system is
properly grounded before applying power.
Failure to do so will result in death or serious
injury.

(000188)

DANGER

Electrocution. Do not wear jewelry while 
working on this equipment. Doing so will 
result in death or serious injury.

DANGER

Electrocution. DO NOT use the unit if
electrical cord is cut or worn through. Doing
so will result in death or serious injury.

(000263a)

Содержание MAGNUM MLT4060MVD









































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды