manualshive.com logo in svg

Generac Power Systems MAGNUM MDG20IF4, Руководство по эксплуатации

Поделиться
Скачать
Generac Power Systems MAGNUM MDG20IF4 Скачать руководство пользователя страница 15

General Information

37100 B

MDG20IF4-MLG20IF4 Operating Manual

9

POWER ZONE™ LIGHT CONTROLLER

The Power Zone™ controller is an auto start controller that monitors the unit and indicates operational status and 
fault conditions. The controller can be programmed to automatically start or stop based on time schedule, fault 
condition, or load demand.

The controller constantly monitors vital generator and engine functions for a number of preprogrammed alarm and 
fault conditions. When a fault condition occurs, the engine can be shut down automatically and the LCD window will 
show the fault that caused the shutdown. To resume operation, the fault condition must be resolved.

This controller also records a history of unit performance, which may be viewed at any time and will not be lost when 
the controller is powered down.

Figure 5 - Power Zone™ Light Controller Layout

Controller Features and Functions

The Liquid Crystal Display (LCD) Window

This window will display the various operator screens. By viewing these screens, the operator will be able to monitor 
both the engine and generator status while the unit is running.

Select LED

This LED will be lit when the unit is running in Auto mode.

Select Button

This button will select and edit menus and screens.

Start Mode LED

This LED will be lit when the unit is running in Manual mode.

1. LCD window

5. Stop button

2. Select LED

6. Stop LED

3. Start LED

7. Select button

4. Start button

8. Menu navigation

Select

02017

1

2

3

4

5

6

7

8

Discount-Equipment.com

Содержание MAGNUM MDG20IF4













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды