Generac Power Systems MAC400HC, Руководство пользователя

Страница: 24 / 40

20 Owner’s Manual for Flameless Heat Cart
Maintenance
Other Maintenance Checks
At 1000 Operation Hours
• Change engine oil and oil filter element.
• Inspect engine accessory drive belts.
• Inspect fuel supply system.
• Clean cooling system circuit.
• Inspect and clean the starter and alternator (*).
• Inspect valve clearance (*).
• Inspect injection nozzle (*).
• Change fuel filter element.
• Clean water sedimenter element.
• Clean electromagnetic pump filter.
At 1250 Operation Hours
• Replace fuel filter element.
• Clean water sedimenter element.
• Clean electromagnetic pump filter.
At 1500 Operation Hours
• Change engine oil and oil filter element.
• Inspect engine accessory drive belts.
• Inspect fuel supply system.
• Clean positive crankcase ventilation valve.
• Inspect injection nozzle (*).
• Change fuel filter element.
• Clean water sedimenter element.
• Clean electromagnetic pump filter.
After 1500 Operation Hours
All hours-based checks and maintenance should now be performed every 250
hours.
(*) = When servicing these items, consult the equipment supplier.
NOTE: All service and maintenance or repairs are recommended to be completed by a GMP ASD to maintain the
warranty status of a unit. You cannot be denied emissions warranty coverage solely based on failure to complete
recommended service maintenance.
Every 500 Hours • Change air filter.
Every 1000 Hours
• Change hydraulic oil.
• Change hydraulic pump filter.
Annually
• Change hydraulic breather/separator.
• Carbon monoxide (CO) test at outlet air duct by trained service technician.
• Inspect blower/fan hardware for condition and tightness.