Generac Mobile MDE570P, Руководство пользователя, Страница: 5 / 80

Owner’s Manual for Mobile Generator 1
Section 1: Introduction and Safety
Introduction
Thank you for purchasing a Generac Mobile product.
This unit has been designed to provide high
performance, efficient operation, and years of use when
maintained properly.
The information in this manual is accurate based on
products produced at the time of publication. The
manufacturer reserves the right to make technical
updates, corrections, and product revisions at any time
without notice.
Read This Manual Thoroughly
If any section of this manual is not understood, contact
your nearest GMASD, or contact Generac Mobile
Technical Service at 1-800-926-9768 or
www.generacmobileproducts.com
with any questions or
concerns.
The owner is responsible for proper maintenance and
safe use of the equipment. Comply with regulations the
Occupational Safety and Health Administration (OSHA)
has established, or with equivalent standards. Also, verify
that the unit is applied, used, and maintained in
accordance with the manufacturer's instructions and
recommendations. Do nothing that might alter safe
application/usage and render the unit in noncompliance
with the aforementioned codes, standards, laws, and
regulations.
Save these instructions for future reference. This manual
contains important instructions for the unit that should be
followed during setup, operation and maintenance of the
unit and battery. ALWAYS supply this manual to any
individual that will use this machine.
How to Obtain Service
When the unit requires servicing or repairs, contact a
GMASD for assistance. Service technicians are factory-
trained and are capable of handling all service needs. For
assistance locating a dealer, go to https://
www.generacmobileproducts.com/parts-service/find-
service .
When contacting a GMASD about parts and service,
always supply the complete model and serial number of
the unit as given on the data decal located on the unit.
Record the model and serial numbers in the spaces
provided on the front cover of this manual.
Safety Rules
The manufacturer cannot anticipate every possible
circumstance that might involve a hazard. The warnings
in this manual, and on tags and decals affixed to the unit
are, therefore, not all inclusive. If using a procedure, work
method or operating technique that the manufacturer
does not specifically recommend, verify it is safe for
others. Also make sure the procedure, work method, or
operating technique utilized does not render the
equipment unsafe.
Safety Symbols and Meanings
Throughout this publication, and on tags and decals
affixed to the unit, DANGER, WARNING, CAUTION and
NOTE blocks are used to alert personnel to special
instructions about a particular operation that may be
hazardous if performed incorrectly or carelessly. Observe
them carefully. Their definitions are as follows:
NOTE: Notes contain additional information important to
a procedure and will be found within the regular text of
this manual.
These safety alerts cannot eliminate the hazards that
they indicate. Common sense and strict compliance with
the special instructions while performing the action or
service are essential to preventing accidents.
(000100a)
Consult Manual. Read and understand manual
completely before using product. Failure to
completely understand manual and product
could result in death or serious injury.
WARNING
(000001)
DANGER
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
(000002)
WARNING
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
(000003)
CAUTION
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.