manualshive.com logo in svg

Generac Mobile G4-ECO, Руководство пользователя

Поделиться
Скачать
Generac Mobile G4-ECO Скачать руководство пользователя страница 6

Introduction and Safety

2

Owner’s Manual for G4-ECO Light Tower

General Hazards

(000103)

Asphyxiation. Running engines produce carbon 
monoxide, a colorless, odorless, poisonous 
gas. Carbon monoxide, if not avoided, will 
result in death or serious injury.

DANGER

(000107)

Hearing Loss. Hearing protection is 
recommended when using this machine. 
Failure to wear hearing protection could 
result in permanant hearing loss.

WARNING

(000111)

WARNING

Moving Parts. Keep clothing, hair, and 
appendages away from moving parts. Failure 
to do so could result in death or serious injury.

(000108)

WARNING

Hot Surfaces. When operating machine, do not 
touch hot surfaces. Keep machine away from 
combustibles during use. Hot surfaces could 
result in severe burns or fire.

WARNING

Risk of injury. Do not operate or service this machine 
if not fully alert. Fatigue can impair the ability to 
service this equipment and could result in death or 
serious injury.

(000215)

(000139)

WARNING

Risk of burns. Allow engine to cool before 
draining oil or coolant. Failure to do so could 
result in death or serious injury.

WARNING

Personal Injury. Do not use lifting eye if there are  
signs of damage or corrosion. Doing so could result  
in death, serious injury, or property damage.

(000433)

WARNING

Personal Injury. Do not use lifting eye other than as 
directed. Doing so could result in death, serious 
injury, or property damage.

(000434)

DANGER

Asphyxiation. Do not operate unit without 
a properly functioning exhaust system. 
Doing so will result in death or serious injury.

(000340)

Electrical Hazards

(000145)

DANGER

Electrocution. In the event of electrical accident, 
immediately shut power OFF. Use non-conductive 
implements to free victim from live conductor. Apply 
first aid and get medical help. Failure to do so will 
result in death or serious injury.

(000104)

DANGER

Electrocution. Water contact with a power 
source, if not avoided, will result in death 
or serious injury.

(000144)

DANGER

Electrocution. Contact with bare wires, 
terminals, and connections while generator 
is running will result in death or serious injury.

(000152)

DANGER

Electrocution. Verify electrical system is
properly grounded before applying power.
Failure to do so will result in death or serious
injury.

(000188)

DANGER

Electrocution. Do not wear jewelry while 
working on this equipment. Doing so will 
result in death or serious injury.

DANGER

Electrocution. DO NOT use the unit if
electrical cord is cut or worn through. Doing
so will result in death or serious injury.

(000263a)

Содержание G4-ECO













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды