Genelec G Two, Быстрая настройка

Страница: 9 / 20

English 9
Table 1: Suggested tone control settings for different acoustical environments
the loudspeaker must always be open to the listen-
ing room with a minimum clearance of 5 centimeters
(2”) behind, above and on both sides of the loud-
speaker. The space adjacent to the amplifier must
either be ventilated or sufficiently large to dissipate
heat so that the ambient temperature does not rise
above 35 degrees Celsius (95°F).
Mounting options
The G Two offers several mounting options: The
Iso-Pod™ (Isolation Positioner/Decoupler™) vibra-
tion insulating table stand allows tilting the loud-
speaker for correct vertical alignment. On the base
of the loudspeaker is a 3/8” UNC threaded hole
compatible with a standard microphone stand. On
the rear there are threaded holes for Omnimount
®
brackets.
Maintenance
No user serviceable parts are to be found within
the amplifier unit. Any maintenance or repair of
the unit should only be undertaken by qualified
service personnel.
Safety considerations
Although the G Two has been designed in accord-
ance with international safety standards, the fol-
lowing warnings and cautions should be observed
to ensure safe operation and to maintain the loud-
speaker under safe operating conditions:
• Servicing and adjustment must only be
performed by qualified service personnel.
• The loudspeaker must not be opened.
• Do not expose the loudspeaker to water or
moisture. Do not place any objects filled with
liquid, such as vases on the loudspeaker or
near it.
• This loudspeaker is capable of producing
sound pressure levels in excess of 85dB, which
may cause permanent hearing damage.
• Free flow of air behind the loudspeaker is
necessary to maintain sufficient cooling. Do not
obstruct airflow around the loudspeaker.
• Note that the amplifier is not completely
disconnected from the AC mains service
unless the mains power cord is removed from
the amplifier or the mains outlet.
Guarantee
The G Two is guaranteed for a period of two years
against faults in materials or workmanship. Refer to
supplier for full sales and guarantee terms.
Compliance to FCC rules
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
This device may not cause harmful interference, and
this device must accept any interference received,
including interference that may cause undesired
operation.
Note: This equipment has been tested and found
to comply with the limits for a Class B digital de-
vice, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection
against harmful interference in a residential instal-
lation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may
cause harmful interference to radio communica-
tions. However, there is no guarantee that interfer-
ence will not occur in a particular installation. If this
equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user is en-
couraged to try to correct the interference by one or
more of the following measures: