01
Charger mode
Features
* 6A, 4ch simultaneous charger ( Dual SMPS built-in ) (6A model only)
* 6A or 3A supplied automatically according to capacity.
* No. of LEDs turned on indicates the capacity during charging and discharging
* Power station : Battery packs are hot swappable (G-CB100 only )
Quick Charger
for Li-ion Batteries
04
Safe instructions
05
Quick guide
G-C100 (3.5A)
G-CB100
Switch on the main power on the rear panel of the charger
01
Connect the battery packs, then the charger detects which
battery packs they are. It takes max. 12 seconds.
02
It starts charging automatically and simultanuously.
195Wh, 290Wh and 390Wh : by 6A
98Wh and other companies' packs : by 3A
*
Red LEDs on : means it is being charged by 6A
Orange LEDs on : means it is being charged by 3A
Yellow-green LEDs fully on : means fully charged.
No. of LEDs on : means remaining capacity
03
Yellow-green LEDs fully blinking : Battery packs are not activated by sleep mode or any problems
LEDs off : This charger has a problem itself
Red LEDs on each channel fully blinking : SMPS power supply inside charger doesn't work
Errors
*
1. Risk of electric shock. Do not remove cover, no user serviceable parts inside the product.
2. Protect the product from water, moisture and dust.
3. The presence of electricity near water can be dangerous.
4. Use only with recommended batteries.
5. A standard three-pin AC plug must be used and earth pole must be connected to the earth line.
6. During charging, the temperature of the charger will rise, this is normal, not a malfunction.
7. A short b and - on charger pins may cause fire, electrical shock or other incidents.
1. Slots and openings are intended for ventilation purposes to ensure reliable operation
of the product and protect it from overheating.
2. Do not block or cover any slots and openings.
3. Indoor use only. To reduce the risk of fire or electric shock, do not expose
this charger to rain or moisture.
CAUTION!
Switch on the main power.
01
Connect the battery packs.
02
Turn on BANK-SW button. (G-CB100 only)
01
XLR : Sum of two outlets : 10A
02
Red LEDs on : It is being discharged now
Yellow-green LEDs on : They are ready to be used.
No. of LEDs on : means remaining capacity.
Charging
Power station
1
2
WARNING!
1
2
3
3
2
1
3
03
Red LED on : 6A charging
Orange LED on : 3A charging
Yellow green LED fully on : fully charged
03
*
