Gemotech RemoDAQ-9X20 Series Скачать руководство пользователя страница 64

Страница: 64 / 81

RemoDAQ-9X20 Series User’s Manual

Figure 5-16: Alarm Setting for Analog Input and Counter

Modules

There are three alarm types in Analog Input Modules:

Disable:

RemoDAQ-9X20 dose not executive alarm

diagnosing function.

Momentary:

When the Input value is over or under the

High/Low limit, the alarm signal will be sent
only once.

Latch:

When the input value is over or under the

High/Low limit, the alarm signal will be latched

till clicking the “Clear Latch” button.

Note:

The alarm types of RemoDAQ-9080 include

“Disable” and “Latch only.

5.3.5 Security Setting

Though the technology of Ethernet discovered with

great benefits in speed and integration, there also exist risk

about network invading form anywhere. For the reason, the

security protection design has built-in RemoDAQ-9X20

Содержание RemoDAQ-9X20 Series


















































































Результаты поиска

Содержание RemoDAQ-9X20 Series

Отзывы:

Gemotech RemoDAQ-9X20 Series, Руководство пользователя, Страница: 64 / 81

Результаты поиска

Содержание RemoDAQ-9X20 Series

Отзывы: