GEMORO PLATINUM PRO1000V
4
memory function as described in the MEMORY
PROCEDURE section noted below.
2. TARE - Push this button once to bring the scales
display back to 0.0g while in the gram mode (this
feature may be used in any mode). When using a
weighing tray or other type of scoop or container,
simply place the tray, etc. on the weighing platform
and then push the TARE (zero) button once to
automatically subtract the weight of whatever was
on the weighing platform while maintaining the
subtracted weight in its memory. The display will
then show 0.0g. If you then take the tray off of the
weighing platform, from its memory the display
will show a negative weight equal to the weight of
the tray or whatever was on the weighing platform.
After placing the tray back on the weighing
platform, you may then place the item that you
wish to weigh directly into the tray and weigh it
independently. When you no longer wish to use the
tray, you may press the TARE button once again
to bring the display back to 0.0g or press the ON/
MEM button once to turn the scale off since both
of these steps will subtract the weight from its
memory.
3. MODE/CAL - To change the scales unit of