3
INSTRUCTION MANUAL
INSTRUCTIONS FOR USE
Before using the PRO1000V, to activate the installed
batteries, remove the plastic tab that serves as
the battery insulator power discharge protector
located on the battery terminal inside of the battery
compartment. With the stainless steel weighing
platform positioned onto the PRO1000V, gently
rotate the scales weighing platform clockwise to
reveal the scales bubble balance leveling indicator
and then adjust the feet as needed by unscrewing in
order to make the scale level. Then rotate the scales
weighing platform counterclockwise until in its locked
position. The scale is now ready to be turned on and
used.
CONTROL PANEL 6 BUTTON ID
& EXPLANATION
1. ON/MEM - Push this button once to turn the scale
on. While in the gram mode, the blue backlit
display will then show 0.0g after it stabilizes (the
scale will automatically display the last unit of
measure (g, oz, dwt, ozt, ct or Parts Counting)
that was programmed into the scales memory,
by pushing the MODE/CAL button. When the
scale is on, push this button to begin using the