BrilliantSpa Black Diamond Manual
7
TO USE THE STEAMER
· The steamer may be used as soon as it has built up sufficient
pressure to light up the green LED indicator.
· Using the tweezers, hold jewelry approximately one inch beneath the
steam nozzle. Be aware that the steam is HOT.
· While being careful not to touch the gray fill cap because it too
is HOT, release the steam by pressing down on the gray steam
activation button on the top rear of the unit, behind the fill cap.
· It is recommended to use short, one or two second bursts to prolong
maximum steam pressure.
WHEN IT BECOMES NECESSARY TO REFILL
· Turn the unit off by flipping the power switch located on the power
cord to the “0” position.
· Unplug it from the power outlet.
·
Allow sufficient cooling time of approximately 30 minutes prior to
refilling the tank. As a safety feature, the gray fill cap can not be
removed until it has sufficiently cooled.
· While maintaining an arms length distance from the machine
slowly
unscrew the gray fill cap in the back. As you are unscrewing the
gray fill cap the remaining pressure will release from around it. Press
down on the steam activation button in the rear of the appliance to
more quickly release the remaining steam in its tank. Remove the
gray fill cap.
· Lift the entire appliance by holding the handles on either side.
· Turn the appliance upside down over a sink to drain the steamer tank.
To fully drain the steamer tank, while holding upside down, press the
steam activation button.
· Follow the instructions 1-6 on the Quick Reference Guide above to
refill the BrilliantSpa Black Diamond.
