GE370 – GEMINI ELECTRONIC:
BASIC PROGRAMMING STEPS
Changing the master code:
Out of the box, the GE370 is already programmed with a default master code
(11 33 55 77) and a default user code (22 44). It is highly recommended by the
manufacturer that both of these codes be changed immediately by the user
after installation. Do NOT forget the new master code you choose – you will
not be able to use any of the programming functions without the master code.
***Make sure the lock is unlocked prior to any programming***
To change the master code, follow these steps: (1) Press “#” [there will be two
quick green flashes] (2) Enter the old master code [you will see several rapid
green flashes] (3) Press “01” [you will see several rapid green flashes] (4) Enter
your new 8 digit master code [you will see several rapid green flashes] (5) Re-
enter your new 8 digit master code to confirm. Your new master code is set.
