Gemalto SafeNet Luna Network HSM 7.0 Скачать руководство пользователя страница 50

Страница: 50 / 52

3 SafeNet Luna HSM Client Software Installation

LunaHSMClient.exe /install /l install.log /quiet /norestart ADDLOCAL="SA,SA_CSP_KSP,SA_JSP,SA_
SDK,SA_JCProv"

If you wish to install only some of the components, just specify the ones you want after the product name (SA in
this example).

Installing the Luna HSM Client for the SafeNet Luna PCIe HSM

Use the

ADDLOCAL=PCI

flag to install the base client software for the SafeNet Luna PCIe HSM. Include the flags

listed below to install any optional software components you desire. The base software must be installed first.

Note:

The setting

/l install.log

is optional and will save the installation logs to the file

install.log

. The

install.log

file is required only if troubleshooting an issue with Technical

Support.

To install the Luna HSM Client for the SafeNet Luna PCIe HSM

From the location of

LunaHSMClient.exe

run one of the following commands:

•

Install the base Luna HSM Client software for SafeNet Luna PCIe HSM

LunaHSMClient.exe /install /l install.log /quiet /norestart ADDLOCAL="PCI"

•

Install the base Luna HSM Client software and any of the following optional components for the SafeNet Luna PCIe
HSM that you desire:

Product or
component

Description

PCI_CSP_KSP

CSP and KSP components for the SafeNet Luna PCIe HSM

PCI_JSP

JSP component for the SafeNet Luna PCIe HSM

PCI_SDK

SDK component for the SafeNet Luna PCIe HSM

PCI_JCProv

JCPROV component for the SafeNet Luna PCIe HSM

PCI_SNMP

SNMP subagent component for the SafeNet Luna PCIe HSM

For example, the following command installs the base software and all of the optional components:

LunaHSMClient.exe /install /l install.log /quiet /norestart ADDLOCAL="PCI,PCI_CSP_KSP,PCI_
JSP,PCI_SDK,PCI_JCProv,PCI_SNMP"

If you wish to install only some of the components, just specify the ones you want after the product name (PCI in
this example).

Installing the Luna HSM Client for the SafeNet Luna USB HSM

Use the

ADDLOCAL=USB

flag to install the base client software for the SafeNet Luna USB HSM. Include the flags

listed below to install any optional software components you desire. The base software must be installed first.

SafeNet Luna Network HSM Installation Guide

Содержание SafeNet Luna Network HSM 7.0





















































Результаты поиска

Содержание SafeNet Luna Network HSM 7.0

Отзывы:

Gemalto SafeNet Luna Network HSM 7.0, Руководство по установке, Страница: 50 / 52

Результаты поиска

Содержание SafeNet Luna Network HSM 7.0

Отзывы: