Cinterion
®
ENS22-E AT Command Set
7.2 AT^SICI
ENS22-E_ATC_V01.000
19/02/11
Page 99 of 189
Local IPv4 address of the Internet connection profile ("0.0.0.0" if no address is associated yet), or local IPv6
address ("::" if no address is associated yet).
7.2.1
Checking Connection Profile Status
Assume the network connection is temporarily not available. (If URC presentation mode of network registration
is enabled the state is shown by the URC "
The network connection is temporarily not available but the Internet connection is still established, so the host
may decide to stop the data transfer to minimize the risk of losing data due to memory limitations.
Another service has been opened with
:
After closing one service with
:
After closing the last service with
:
<conAddr>
(str)
at^sici?
Query the current status of the connection profile.
^SICI: 1,2,1,"10.10.0.161"
One connection profile has been created at
=1, and one service is opened using
this connection profile. The Internet connection is in
=2 ("Up").
OK
at^sici?
Query once again the current status of the connec-
tion profile.
^SICI: 1,3,1,"10.10.0.161"
Parameter
has changed to state "Lim-
ited up".
OK
at^sici?
Query once again the current status of the connec-
tion profile.
^SICI: 1,2,1,"10.10.0.161"
After re-establishing the network connection,
reverts to state "Up".
OK
at^sici?
Query once again the current status of the connec-
tion profile.
^SICI: 1,2,2,"10.10.0.161"
After opening another service, parameter
has increased.
OK
at^sici?
Query once again the current status of the connec-
tion profile.
^SICI: 1,2,1,"10.10.0.161"
Parameter
has decreased.
OK
at^sici?
Query the current status.
^SICI: 1,0,0,"0.0.0.0"
The bearer is closed now. Parameter
has decreased.
OK