Gema PS07 Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 36

Gema PS07 Скачать руководство пользователя страница 21

Rev. 00 02/17

PS07

Maintenance / Repairs



21

Maintenance / Repairs

ATTENTION

Any unauthorized modifications and alterations to the product are
not permitted for safety reasons and exclude the manufacturer’s
liability for any resulting damage!

Regular and conscientious cleaning and maintenance increase
the service life of the product and ensure consistent high coating
quality!

– The parts to be replaced during maintenance work are available

as spare parts. These parts can be found in the appropriate
spare parts list!

General information

The product is designed to require a minimum of maintenance.

Safety

Securing against unexpected start-up

The machine starting unexpectedly may cause serious injuries to persons
working on the machine.

1.

Set the safety switch to <0> and lock it.

2.

Remove the key and keep it with you.

Explosion protection

Lack of maintenance and a lack of ignition protection can lead to
explosions.

–

Do not modify the machine.

–

Do not use potentially explosive products, operational material or
cleaning liquids.

–

Maintain, clean and lubricate the machine correctly.

–

Only use original spare parts.

«
...
19
20
21
22
23
...
»

Содержание PS07





































Отзывы:

Нет отзывов