Gema OptiGun GA03-E, Инструкция по эксплуатации и список запасных частей

Страница: 36 / 45

V 02/22
34
•
Spare parts list OptiGun GA03-E
OptiGun GA03-E
– complete
Only parts were included in the spare parts list, which the user
can replace himself without problems!
– If the powder gun cable ( 4
) is defective, it is to be completely
sent in for repair!
OptiGun GA03-E Enamel automatic gun
– complete with Flat jet nozzle, polarity
negative, incl. pos. 1-9
1009 422
OptiGun GA03-E Enamel automatic gun
– complete with Round jet nozzle, polari-
ty negative, incl. pos. 1, 4-11
1009 421
1 OptiGun GA03-E gun body
– complete, polarity negative
1009 415
2 Threaded sleeve
– see "Nozzle combinations" spare parts list
3 Flat jet nozzle
– complete, see "Nozzle combinations" spare parts list
4 Gun cable
– complete, 20 m, see also spare parts list "Gun cable"
1008 663
5 Cylinder screw
– M8x50 mm
235 113
6 Washer
– Ø 8.4/20x2 mm
215 880
7 Cable tie with Velcro closure (8x) (not shown) 303 070
8 Quick release connection
– NW5, Ø 6 mm, for pos. 11 (not shown)
200 840
9 Cleaning brush
– Ø 12 mm (not shown)
389 765
10 Threaded sleeve
– see "Nozzle combinations" spare parts list
11 Round jet nozzle
– complete, incl. deflector Ø 28 mm, see "Nozzle combinations"
spare parts list
12 Electrode rinsing air hose
– Ø 6/4 mm (not shown)
103 144
*
13 Powder hose
– Ø 16/11 mm (not shown)
103 012
*
*
Please indicate length
#
Wearing part
Fig. 9: OptiGun GA03-E
– complete