Gema OptiFlex Pro B Spray, Инструкция по эксплуатации и список запасных частей

Страница: 34 / 58

Rev. 00 03/19
34  Operation OptiFlex Pro B Spray
Cleaning mode
The cleaning mode enables blowing off powder accumulations in the
powder hose with preset air pressure.
Cleaning programs
Powder chamber emptying combined with hose cleaning
in both directions
In this cleaning program (key T13 ), some air is blown through the filter
elements in the powder chambers. The cleaning process can be
additionally supported by blowing compressed air into the suction hose.
ATTENTION
Too high pressure could damage the pump parts.
– The application pump may be cleaned with a pressure of max. 4
bar.
Cleaning the hose to the gun
CAUTION
Large dust formation possible!
– The conveying hose and the powder gun must be pointed into the
booth during the cleaning procedure!
In this cleaning program (key T14 ), the powder hose to the gun will be
cleaned with several air blasts. During this time, the pinch valve on the
suction side remains closed.
Cleaning the hose on the suction side
CAUTION
Large dust formation possible!
– The powder hopper must be empty
or
– the suction hose must be pointed into the booth during the
cleaning procedure!
In this cleaning program (key
T15
), the powder hose on the inlet of the
application pump will be cleaned with several air blasts. During this time,
the pinch valve on the output to the gun remains closed.